EVO™ 550 & EVO™ 5000
EVO™ 550 & EVO™ 5000
EVO™ 550 & EVO™ 5000 Automatic Tank Gauges (ATGs) provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system.
NEVER STOP EVOLVING
We are driven by our pursuit to innovate, simplify, secure, and connect every station owner to their fuel management system. EVO™ 550 and EVO™ 5000 ATGs feature simple setup and operation, remote connectivity, and advanced security features to protect your fuel system while keeping you directly connected to vital site data whenever, and wherever.
Input Capacity
EVO™ 550 can support up to 36 sensors and 36 probes, while the EVO™ 5000 can support up to 72 sensors and 72 probes.
Turbine Pump Interface
Enhanced remote pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Remote Communication
The FFS PRO® Connect web interface allows users to securely connect directly to an EVO™ Series ATG from any web enabled device.
Inventory Reconciliation
Inventory Reconciliation is an automated leak detection function that analyzes tank volume, deliveries, and sales data to detect releases with a high level of accuracy.
Tank Autocalibration
Eliminate discrepancies in delivery reporting and daily reconciliations caused by inaccurate tank information programmed into the ATG with this function that automatically generates a highly accurate tank strapping chart.
Electronic Line Leak Detection
Electronic line leak detection (ELLD) learns the characteristics of each line, eliminating possible configuration errors and ensures unparalleled leak detection accuracy.
Secondary Containment Monitoring
Continuously monitor double-wall piping, tank, and sump interstitial spaces to detect any potential leaks in these double-wall containments.
DEF/AdBlue® Recirculation
Get automated control of your Diesel Exhaust Fluid (DEF) system while preventing frozen lines with energy and cost-saving recirculation functionality.
EVO™ Series ATGs help keep sites in compliance while providing marketers with the highest level protection from the security threats facing our industry.
Turbine Pump Interface is a powerful tool that creates a network between your Submersible Turbine Pump (STP) controllers and EVO™ Series ATGs. Through TPI, the tank gauge can be programmed to respond to faults in the submersible pumping system and react with intelligence that pump controllers alone cannot.
SEE TPI IN ACTIONPump In Water Automation
When the water level in a tank approaches the pump intake, the tank gauge will enter alarm mode and automatically shut down the pump, protecting the system and consumers from water being pumped from that tank.
Leveling & Priority Modes
When managing two storage tanks of the same product ‘Leveling Mode’ can keep both tanks at the same percentage full without the use of a syphon bar between the two tanks.
Remote Pump Interaction
By networking the intelligent controllers to the fuel management system via TPI, a technician can remotely connect to the site to review the logged event history and view the status.
EVO™ 550 and EVO™ 5000 ATGs offer additional advanced features and capabilites to manage your entire system as efficiently as possible.
WATCH THEM IN ACTIONAutoLearn™ Technology
Patented AutoLearn™ electronic line leak detection capability including Statistical Line Leak Detection for high throughput sites.
Corrosion Control™ System
Proactively monitor for and remove corrosion-causing water from your fuel system with system automation and monitoring powered by EVO™ 550 or EVO™ 5000 ATGs.
Streamlined Setup
Hardware auto-detection and wiring confirmation, multipoint tank charting, network printer auto-detection, and the ability to download and upload entire programming profiles from one ATG to another.
The EVO™ Series family of ATGs offers four different options with right-sized features to meet the requirements of your specific application, size, and compliance needs. Which ATG is right for your application?
ATG SELECTION GUIDE
Components
- Cover
- LCD touch screen
- LED indicators
- Printer
- Mounting tabs
- Cooling vents
- Module slots
- Communication ports
- Modem port
- Annunciator (audible alarm)
- Ethernet port
- USB ports (qty 2)
- Serial comm port 1
- Bus extenstion
- Serial comm port 2
- RS-485 comm port
- Controller module
- Power supply module
- AC input module
- 10 Amp relay module
- I/O module
- 4-20mA module EXP
- Relay module
- Blank
- Intrinsically safe barrier
- Probe module
- 4-20mA module
- 2 wire sensor module
- 3 wire sensor module
Specifications
- Maximum tanks monitored: 36 (EVO™ 550) / 36 (EVO™ 5000)
- Maximum sensor input capacity: 48 (EVO™ 550) / 96 (EVO™ 5000)
- Lines capacity: 24 (EVO™ 550) / 24 (EVO™ 5000)
- Dry contact input channels: 2
- AC input channels: 36 (EVO™ 550) / 36 (EVO™ 5000)
- Relay output channels: 24 (EVO™ 550) / 24 (EVO™ 5000)
- Connectivity: Ethernet, RS-485, standard USB (qty 2)
- Display type: 7” (17.78 cm) color LCD touch screen
- Printer type: Thermal (also network or USB)
- Alarm: Internal audible alarm
- LEDs: Alarm, warning, and power
- Applicable liquids: Petroleum, chemicals, and waste
- Level units: Inches, centimeters, and millimeters
- Volume units: gallons or liters (mass with density option)
- Power requirements: 110 to 240 VAC, 50/60 hz, 2.6 Amps
- Operating temperature: 32° to 104 °F (0° to 40 °C)
- Humidity: 0-90% non-condensing
- EVO™ 550: H: 11.75”(300mm), W: 10¼”(260mm), D: 9”(229mm)
- EVO™ 5000: H: 11.75”(300mm), W: 16½”(419mm), D: 9”(229mm)
Capabilities
- High/low product, water, and temperature alarm set points
- Inventory reconciliation / tank auto-calibration / flow rate monitoring
- Density, mass, and phase separation measurement
- Email and SMS notifications
- Back-up generator monitoring / fuel flow control
- Advanced logic control for DEF/AdBlue® recirculation system
- MODBUS™ support
Approvals
- UL, cUL, ATEX, IECEx
- Third party certification of leak detection capabilities.
Ordering Guide
ATG model, software and hardware options can be listed separately or combined when ordering. Systems shipped from the factory will list the combined part number. Complete part numbers have a specific order and are created using the following guidelines:
TX DPMIE / TRLGSC
- TX = Base Model Options
- T550E = EVO™ 550 base ATG
- T5000E = EVO™ 5000 base ATG
- DPMIE = Hardware Options (choose all that apply)*
- D = Display
- P = Printer
- M = Internal modem
- I = Dispenser interface module
- E = LON module
- TRFLGC = Software Options (choose all that apply)
- T = SCALD 24-hour tank testing
- R or F
- R = Reconciliation/Autocalibration
- F = Reconciliation/Autocalibration with Flow Rate Monitoring
- L or G
- L = Line leak detection
- G = Generator Line Leak Detection
- S = Secondary containment monitoring
- C = Recirculation, scheduling, and timer conditions
*Only one EVO-DIM or EVO-LON module can be installed per ATG.
Example: T550EDPMI/TRL = EVO™ 550 base model with display, with printer, with internal modem, with dispenser interface module, with SCALD, with reconciliation/autocalibration, and line leak detection.
EVO™ 550 & EVO™ 5000 Base Models
| Model Number | Description |
|---|---|
| T550E | EVO™ 550 base model automatic tank gauge |
| T5000E | EVO™ 5000 base model automatic tank gauge |
EVO™ 550 and EVO™ 5000 Interface Modules
The EVO™ 550 and EVO™ 5000 come standard with a power supply module and a controller module. Additional interface modules can be installed. Interface modules ordered with an EVO™ will be installed at the factory. If you would like them to not be installed, please order the spare/replacement version of the module. The following guidelines must be followed:
- EVO™ 550: Six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module.
- EVO™ 5000: Eleven total modules can be installed with a maximum of nine intrinsically safe modules and a maximum of three of any one kind of module.
Note: Do not include the Power Supply and Controller Modules when calculating total modules allowed.
Pre-Installed Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| TS-2WSNS | Pre-Installed 2-Wire Sensor Module | 12 inputs | Compatible with FMP-HFS2, FMP-UHS, FMP-ULS, TSP-HLS-XX, and TSP-HLS-XX/SS sensors |
| TS-3WSNS | Pre-Installed 3-Wire Sensor Module | 8 inputs | Compatible with FMP-DDS*, FMP-DIS*, FMP-DTS*, FMP-EIS*, FMP-HIS*, FMP-HIS-XL*, FMP-UHS*, FMP-ULS*, TSP-DVS, TSP-HLS-XX, and TSP-HLS-XX/SS sensors |
| TS-PRB | Pre-Installed Probe Module | 12 inputs | Compatible with TSP-LL2-XXX, TSP-LL2-XXX-I, FMP-LL3-XXX, and FMP-LL3-XXX-I probes; TSP-DMS-XX and FMP-XXX-U sensors; and VFM vapor flow meters |
| TS-420IB | Pre-Installed 4-20 mA Module | 8 inputs | Intrinsically Safe | Compatible with TS-LSU500/X transducers and FMP-TEM, TS-VPS, and TS-SCCM sensors |
- -U sensors are not supported on the 2-wire or 3-wire sensor module.
Pre-Installed Non-Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| TS-10ARLY | Pre-Installed 10 Amp Relay Module | 6 outputs | 10 Amp | Compatible with high power dispenser shutdown control functions |
| TS-420EXP | Pre-Installed 4-20 mA Module | 8 inputs | Explosion-Proof | Compatible with TS-LSU500/X transducers and FMP-TEM, TS-VPS, and TS-SCCM sensors |
| TS-ACI | Pre-Installed AC Input Module | 12 inputs | Compatible with dispenser hook signal monitoring functions |
| TS-IO | Pre-Installed Input Output Module | 4 4-20 mA outputs | 8 3-240 VAC/DC inputs | Compatible with remote monitoring control and building monitoring system interfacing functions |
| TS-RLY | Pre-Installed Relay Module | 8 outputs | 2 Amp | Compatible with TS-LSU500/X transducers, TPI, and TS-SCCM control functions |
- TS-RLY Module is not required for STP control when utilizing turbine pump interface (TPI) communications. The TS-420EXP module requires Controller Module software version 9.5 or greater Do not include Power Supply and Controller Module when calculating total modules allowed.
EVO™ 550 & EVO™ 5000 Hardware & Software Options
EVO™ 550 and EVO™ 5000 ATGs come standard with the ability to perform in-tank static leak detection. The following software and hardware options can be added to customize your ATG. The internal hardware options will be factory installed when ordered with the ATG.
Internal Hardware Options (550/5000)
| Model Number | Description |
|---|---|
| TS-MDMIB | (M) Internal modem, includes fax and data software capability |
| EVO-DIMIB | Internal Dispenser Interface Module upgrade for an existing EVO™ 600/ 6000, dispenser interface cable must be ordered separately |
| EVO-LON | (E) EcheLON™ communication module, IFSF protocol capability |
- Only one EVO-DIM or EVO-LON module can be installed per ATG.
Internal Software Options (550/5000)
| Model Number | Description |
|---|---|
| TS-TT | Statistical Continuous Automatic Leak Detection (SCALD®) 24-hour tank testing |
| TS-TRAC | Tank inventory reconciliation and autocalibration |
| TS-TRAC-F | Reconciliation/autocalibration and flow rate monitoring |
| TS-FLOW | Flow rate monitoring |
| TS-ELLD | Electronic line leak detection |
| TS-ELLD-G | Electronic line leak detection for generator applications |
| TS-SCM | Secondary containment monitoring |
| TS-CON | Enhanced logic conditions including value, counter, value compare, latch, and DEF/AdBlue® recirculation |
- TS-ELLD-G for use only with generator applications, always follow regulatory requirements.
Expansion Consoles
| Model Number | Description |
|---|---|
| EVO-EXPC2 | Secondary console to add six additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000, comes without a display or printer |
| EVO-EXPC | Secondary console to add eleven additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATG, comes without a display or printer |
EVO™ 550 and EVO™ 5000 Replacement Parts
| Model Number | Description |
|---|---|
| TSSP-10ARLY | Spare/Replacement 10 Amp Relay Module |
| TSSP-2WSNS | Spare/Replacement 2-Wire Sensor Module. |
| TSSP-3WSNS | Spare/Replacement 3-Wire Sensor Module. |
| TSSP-420IB | Spare/Replacement 4-20mA Module, Intrinsically Safe |
| TSSP-420EXP | Spare/Replacement 4-20mA Module, Explosion-Proof |
| TSSP-ACI | Spare/Replacement AC Input Module |
| TSSP-IO | Spare/Replacement Input/Output Module |
| TSSP-PRB | Spare/Replacement Probe Module |
| TSSP-RLY | Spare/Replacement Relay Module |
| TSSP-PS | Power supply module |
| TSSP-TRMBLK | Package of 10 assorted terminal blocks |
| TSSP-T550MB | TS-550 motherboard (for use with TS-EMS also) |
| TSSP-T5000MB | TS-5000 motherboard |
| TSSP-SP5FUSE | Spare fuse kit |
| TSSP-EXPPS | Expansion console power supply |
| EVO-CM/R | Replacement TS-550/5000 EVO™ controller module, factory programmed with required options |
| EVO-CMUPG | Upgrade kit for EVO-CM in stock to add original options |
| EVO-TMPTR | Thermal internal printer assembly upgrade for an existing EVO™ 600/6000, EVO™ 550/5000, comes with one roll of printer paper |
| EVO-EXPC | Secondary console to add eleven additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATG, comes without a display or printer |
| EVO-EXPC2 | Secondary console to add six additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000, comes without a display or printer |
| TS-DIMIB | (I) Internal dispenser interface module, dispenser interface cable must be ordered separately |
| TS-LON | (E) EcheLON™ communication module, IFSF protocol capability |
| TS-MDMIB | (M) Internal modem, includes fax and data software capability |
- The serial number of the old CM must be provided when ordering the TSSP or EVO-CM/R. Provide the serial number of the old and new CM when ordering the TSA or EVO-CMUPG.
- Only one TS-DIM or TS-LON module can be installed per ATG.
Featured
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0792 EVO Series Brochure.pdf | 24.89 MB | |
 |
FFS-0620 EVO 550 & EVO 5000 ATG Datasheet.pdf | 1 MB | |
 |
FFS-0779 EVO Series Upgrade Kits Brochure.pdf | 1.5 MB | |
 |
FFS-0743 EVO 600 & 6000 ATG Datasheet.pdf | 2.5 MB | |
 |
FFS-0696 EVO Kit Datasheet.pdf | 2.05 MB | |
 |
FFS-0791 EVO Series Selection Guide.pdf | 5.18 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
000-2173rB TS-550_5000 evo Programming.pdf | 5.01 MB | |
 |
000-2171 EVO 550-EVO 5000 Operators Guide.pdf | 6.99 MB | |
 |
000-2170rD-T5EVO Install.pdf | 1.88 MB | |
 |
000-0536ra MODBUS Interface EVO 550 and EVO 5000.pdf | 0.37 MB | |
 |
10000010405 EVO Series LCD & Display-Interface Board Installation Guide.pdf | 7.25 MB | |
 |
10000017488 EVO Series LCD Install Guide.pdf | 4.63 MB | |
 |
10000014113 EVO Series Console Install Checklist | 0.09 MB | |
 |
TB0124-01 EVO 2_4_6 Autocalibration.pdf | 0.65 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_FMS_TS-EXPC_001.pdf | 0.09 MB | |
 |
CD_FMS_TS-EXPC_001.dwg | DWG | 0.48 MB |
 |
CD_FMS_EVO600_001.pdf | 0.1 MB | |
 |
CD_FMS_EVO600_001.dwg | DWG | 0.38 MB |