The EBW® brand sealing dip cap prevents the overflowing of a tank through uncapped tank dipstick risers. The 3" sealing dip cap incorporates a spring-loaded, self-closing internal valve which seals when the sealing cap is removed and the dipstick is not in place. This innovative safety feature provides overflow protection whether the sealing cap and the dipstick are removed, or the sealing cap is in position with an attached dipstick stored in the tank.
EBW™ Anti Syphon Valves are recommended for all aboveground storage applications to prevent fuel from exiting the storage tank in the event of a broken line or leak. The Anti Syphon Valve will shut-off product flow when lines are broken, preventing fuel spillage and fire hazards.
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
The EBW® vapor shear valve is designed for use as an emergency breakaway on Stage II vapor recovery lines in fuel dispensers. The double poppet design allows spring-loaded poppets inside the valve to seal vapors within both the dispenser riser and vapor piping in the event of dispenser displacement, providing maximum environmental protection.
Aboveground emergency vents are designed to work in conjunction with pressure vacuum vents to prevent an aboveground storage tank from becoming over pressurized in the event of a fire or blockage. When the aboveground tank reaches a determined pressure, the cast iron lid will raise up to allow the pressure to release. When the pressure releases, the cast iron cover will lower and reseat. The sturdy cast iron body and lid, along with the fluorocarbon O-ring, provide a tight seal when closed. All EBW aboveground tank vents are designed to open at 8.0 ounces of pressure.
The PV-ZERO pressure/vacuum vent valve from Franklin Fueling Systems provides an innovative solution for tank venting needs. The patented liquid trap design utilizes vapor pressure to provide positive and negative pressure relief of an underground storage tank. The stainless steel design allows the PV-ZERO to be compatible with both gasoline and E85.
Brass Foot Valve: Foot valves are used to maintain the prime in suction system fuel lines. The foot valves are installed at the bottom of the suction pipe at the bottom of an underground storage tank. Single poppet foot valves are typically used where easy access to the valve is available. Double poppet models offer twice as much protection for maintaining the prime. Both 1-1/2" models can be used with EBW 320 extractor fittings. Foot Valve Extractor: The 320 foot valve extractor is designed for use with the 150 and 156 1-1/2" foot valves. This 20 lb. extractor valve provides a means to remove foot valves easily from underground storage tanks for cleaning or servicing. The 320 foot valve extractor is gasket sealed to prevent loss of prime caused by air being sucked in through the top fitting.
APT® XP pipework provides a highly flexible pipework solution that makes installation simple and easy in any weather condition or site configuration. XP pipework can be used in both pressure and suction applications, and is ideal for underground service station fuel delivery systems. The XP pipework system features controlled flexibility, even in low temperatures, permitting fast, easy installation.
EBW™ brand Defender Series™ multiport sumps feature a solid fiberglass design and provide a watertight tank top containment solution for fill and vapor spill containers. Designed for use with Defender Series™ multiport manways, these multiport sumps allow you to reduce the number of forecourt manways for better site appearance and improved pedestrian safety. The two-piece design eliminates confined spaces and gives installers full access to the containment during installation. The octagonal base design features eight flat panels molded together which provide ideal installation surfaces for 90° pipe entries. Each package includes a watertight sump shield, a sump reducer, the appropriate size and quantity of Neoprene boots and clamps.
UPP® brand composite access covers feature a lightweight, watertight design for safe and easy access to underground containment. The full composite construction of both the lid and the ring provide complete corrosion resistance.