EBW pressure vacuum vents are used on storage tank vent pipes to discharge vapors upward into the atmosphere. The top casting is dome-shaped to quickly drain off moisture including rain, snow and ice. Body and cover are cast aluminum. 2" and 3" models have vent rates of 8000 cubic feet per hour, and produce 8.0 ounces of pressure and 0.5 ounces of vacuum.
Air assisted emergency valves make product handling safer and installation more convenient. The emergency valve has a shear groove that meets 49 CFR 179.345-7. The seat of the valve is located inside of the tank shell as required by DOT regulations. One valve has the capability to be converted to either right or left hand control.
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
The EBW™ brand 498 Series manual nozzle has a cast aluminum body, and stainless steel stem for trouble-free service and easy operation. In addition, this nozzle’s high flow, minimum pressure loss and excellent throttling characteristics provide fast and accurate deliveries with top-off control.
Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
Emergency Valves make product handling safer. These Emergency Valves have a shear groove that meets 49 CFR 178.345-8. The seat area of the valve is located inside the tank shell as required by DOT regulations. This valve gives you the advantage of a faster flow rate while fitting a standard 4" TTMA sump. The high flow rate is established by a full opening throat area. Emergency Valves are available in 90° elbow type or straight type, 4" TTMA flanges or Victaulic™ outlet, and mechanical or air assisted.
FLEX-ING™ brand ball valves provide in-line product flow shutoff, making testing and inspection of equipment easy. Incorporating ball valves into the installation of your pipework system up front can save you on time, labor and dispenser shutdown costs for years to come. The use of ball valves allows you to isolate and shut down the flow of product to specific system components so you can perform maintenance or inspection on only the desired components, while the rest of the system remains in operation.
EBW extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations. E-coated bodies are fully compatible for alcohol/gas blends and biodiesel.
EBW vertical check valves are used on suction system fuel lines to maintain prime. Check valves are installed directly below the dispenser pumping unit. EBW offers both single and double poppet models. Double poppet models offer twice the protection from losing prime. Metal to metal poppet seating. All valves are pressure tested to ensure accuracy.
FLEX-ING™ brand 1½" diesel exhaust fluid shear valves shut off the flow of DEF/AdBlue® in the event of a vehicle collision with a dispenser preventing an excessive and uncontrolled release into the environment. The optional e-coated mounting bracket allows installation both in containment sumps beneath the dispenser as well as direct mounting to the concrete forecourt.