The Side Seal Adapter is designed to give flexibility to top seal drop elbows. Your 4" top seal delivery elbow can now be used on a side 4" seal fill adapter. You don’t have to bring a separate side seal elbow, which reduces cost and the number of fittings required on your truck. Two lever clamps secure the adapter to the station’s side seal fitting and allow a 4" elbow to attach to the adapter. Special locking rings prevent accidental cam arm release during filling. Cast aluminum makes the side seal adapter light and strong. The specially designed seal gives you the added insurance that no leaks will occur.
This watertight, locking fill cap consists of a sturdy brass body with an attractive grey, epoxy coated, cast iron cap. Holes are uniformly located around the edge of the cap so that it may be locked in any position. Furnished with a Buna-N gasket.
FLEX-ING™ brand diesel exhaust fluid ¾" break aways provide in-line protection for hanging hardware in the event of a drive off. These break aways feature a stainless steel design and internal components that make them completely compatible with DEF/AdBlue®. Upon separation the check valve in each half of the break away seals instantly, preventing fuel from escaping at both ends.
The sight glasses featured on this vapor recovery fitting can help detect liquid accumulation in the vapor manifold of a transport. A drain plug lets any extra fuel drain out, and the poppet prevents vapors from escaping when disconnected from the hose. A low pressure drop makes flow rates faster and vapor recovery safer. The adapter is constructed with a standard 4" TTMA flange, a 4" cam and groove, and a mounting pad for the Air Interlock Valve.
Used to install and service PHIL-TITE™ spill containers.
Let gravity do all the work with these high strength, corrosion-resistant adapters. A 22.5 degree angle makes service station drops a breeze with easy hose coupling and fast, unrestricted off-loading. Engineered to mate with API RP 1004 Bottom Loading Adapters, each adapter comes with a heavy-duty attachment chain and uses a large, resilient gasket that guarantees minimum product loss. The lightweight adapters are available in 3" male NPT or male cam and groove; 4" male NPT, male cam and groove or female cam and groove.
These lockable vapor caps act like dust covers, but won’t activate the Air Interlock Valve when used on vapor check valves and adapters. Iron-copper infiltrated cams create a solid push-down-and-pull-up movement for quick, easy removal and replacement; steel latches hold the caps secure. Orange in color to indicate vapor recovery, the caps can be used with any 4" male cam and groove. Caps also available with finger ring and chains.
APT bulkhead boots boast an enlarged gasket area to seal against the sump wall and incorporate the proven advantages of the APT standard flexible entry boot seal. The bulkhead boot requires only a single hole to be drilled for installation, reducing labor time and cost. APT offers a complete line of sizes for ½" through 2½" single and secondary contained pipe. The 1½" through 2½" sizes are also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.
Installation kit for installing the DIS, EIS or ULS sensors in dry interstitial spaces with 2" (5 cm) riser pipe openings. The cap is compression-fit into the riser pipe via the use of a lever.
