4 Hp Pumps
4 Hp Pumps
With faster fill times during peak hours and power savings during non-peak hours, FE PETRO® 4 Hp variable speed submersible pumps deliver maximized profits while mitigating operating expenses.
Since hitting the market in 1988, FE PETRO® Submersible Turbine Pumps (STPs) have developed a reputation as the standard in performance, quality and dependability with innovative features only available from Franklin Electric. It is, and always will be about filling cars faster and smarter.
4 Hp, 2Hp, 1 1/2 Hp, 3/4 Hp, and 1/3 Hp options
Biofuel compatibility handles ethanol / biodiesel blends
Advanced protection prevents corrosion / extends pump life
Variable speed maximizes profits with high flow rates
MagShell® increases flow rates for higher throughput
Variable length adjustment ensures perfect onsite fit
Active air elimination for smooth fuel delivery
Safe and simple service disconnects and pressure relief
Intake filter screen keeps debris out / reduces wear
Intelligent pump controllers maximize uptime
With best-in-class flow rates backed by a long history of dependability, FE PETRO® STPs are responsible for delivering fuel to thousands of customers around the globe, day in and day out.
With faster fill times during peak hours and power savings during non-peak hours, variable speed submersible pumping systems allow you to maximize profits with consistent flow rates while mitigating operating expenses and system wear.
The patented stainless steel MagShell®, available on 2 Hp and 4 Hp pumps, is designed to maximize flow rate capabilities, potential throughput, and profits. By expanding the pump motor shell, the MagShell® increases the area for product flow by 45%.
Network pump controllers with the EVO™ Series for remote enhanced pump monitoring and control features including pump-in-water automation, clogged intake escalation, tank leveling/priority, and more.
Upgrade your pump with components designed for enhanced performance and reduced maintenance.
Stop Corrosion in its Tracks
Advanced Protection safeguards pumps from corrosion. It builds on Alcohol-Gas compatible pumps with upgraded materials including powder-coating, E-coating, and stainless steel components for enhanced durability.
Advanced Protection is available as a factory installed option on any STPAG and IST biofuel compatible STPs. Choose this added level of protection for Ultra Low Sulfur Diesel applications, aboveground tanks, marinas, and aviation applications.
Upgraded Components
Stainless steel relief valve, fasteners, and internal hardware
E-coated and powder-coated exterior metal castings
Stainless steel tank riser
Stainless steel column pipe
E-coated and powder-coated pump discharge head
Stainless steel pump motor assembly shell
Fill Cars Faster with MagShell®
Available on FE PETRO® 2 Hp and 4 Hp PMAs, the MagShell® provides an expanded flow area, creating significantly higher flow rates equivalent to having one more nozzle open during peak operating times.
A 4 Hp variable speed STP with MagShell® provides the highest flow rates of any single 4" submersible pump available on the market today.
Corrosion Control™
When combined with an FE PETRO® pump, the Corrosion Control™ Water Separator provides proactive in-tank corrosion control by removing tank bottom corrosion contributors including water and acid while taking up minimal space inside the containment sump
Remove Water & Acid
The Water Separator removes any water/acid mixture off the bottom of the diesel tank and separates it from the clean fuel. The water/acid is collected in the vessel for disposal while the clean fuel is directed back into the tank.
Powered by the Pump
The Water Separator uses the flow of fuel created by a 4" FE PETRO® submersible turbine pump to generate a vacuum which suctions the tank bottom.
Easy Maintenance
The element-free vessel has no filter to change, eliminating ongoing replacement costs. The collected water/acid mixture is removed 2-3 times per year by a service technician, keeping the tank clear of the harmful corrosion-causing mixture.
System Automation
Control and monitoring are managed through an EVO™ Series console, which automates separator run times and signals when the vessel is ready for emptying. Get access to system data including Water Separator status, water levels, flow status, and more.
Filter Fuel Without Sacrificing Performance
Stop debris from entering the pumping system and causing system damage or slowdowns. An Intake Filter Screen (IFS) provides fuel filtration for the entire system down to about the size of a grain of sand.
The self-cleaning IFS keeps harmful debris, sediment, and tank corrosion from entering the pumping system, minimize service events including dispenser filter changes.
Maximize efficiency, reliability, and control with intelligent pump controllers. Designed to optimize fuel flow and system performance, these intelligent controllers provide advanced functionality to meet the demands of any fueling operation.
MagVFC™ Variable Speed Controllers
For applications with varying demand, the MagVFC™ variable frequency controller provides control for both 2 Hp and 4 Hp variable speed STPs.
The MagVFC™ controller adjusts the pump's speed to maintain optimal flow rates, resulting in faster, more consistent fueling compared to fixed speed systems, all while minimizing energy consumption and costs.
Automatically adjusts pump speed dynamically for optimal flow rates
Provides more consistent fueling compared to fixed speed systems
Maintains stable performance with fluctuating demand
Reduces energy consumption and system wear
Compatible with FE PETRO® 2 Hp and 4 Hp variable speed pumps
Guardian Series™ Fixed Speed Controllers
The Guardian Series™ controllers provide intelligent submersible turbine pump (STP) control and protection for fixed speed pumps.
Built upon the solid FE PETRO® brand smart controller platform, Guardian Series™ controllers feature an enhanced user interface, greater functionality, and facilitate higher performance compared to standard control boxes.
Intelligent submersible turbine pump control and protection
Enhanced user interface for easy setup & troubleshooting
Overload and underload protection to prevent pump damage
Dry-run detection to avoid unnecessary wear
Compatible with FE PETRO® single- & three-phase fixed speed STPs
The FE PETRO® MagVFC™ Variable Frequency Pump Controller brings advanced performance and efficiency to fueling operations. Designed to optimize flow rates, this intelligent controller adjusts pump motor speeds in real time to maintain consistent fuel flow, even during peak demand.
With faster fill times during peak hours and power savings during non-peak hours, FE PETRO® 2 Hp and 4 Hp variable speed submersible pumping systems allow operators to maximize profits while mitigating operating expenses.
Variable speed pumps ensure consistent flow rates, even during peak demand, providing customers with faster fueling and a smoother experience at the dispenser, reducing wait times and improving overall satisfaction.
Minimize sudden pressure spikes, known as hydraulic hammer, that occur during sudden stoppages in flow. These spikes can be exaggerated in fixed speed systems and lead to accelerated equipment wear and damage.
Turbine Pump Interface (TPI) is a powerful tool that creates a network between intelligent pump controllers and EVO™ Series fuel management system consoles.
Turbine Pump Interface
Through TPI, the EVO™ has access to the submersible pumping system status and the capability to react with intelligence that pump controllers alone cannot. The devices share data to provide enhanced system capabilities.
Detect and automatically react to offline systems
Faster pump reset and avoided downtime
Enable remote troubleshooting
Prevent maintenance calls and trip charges
Prevent fuel runouts, dry runs, and tank overfills
Preventing and detecting fuel leaks is critical for maintaining compliance and protecting the environment. Leak detection systems help identify leaks early, reducing the risk of costly downtime and regulatory fines.
Mechanical Leak Detectors (MLD)
MLDs provide a simple, reliable way to detect leaks in pressurized fuel lines. These devices respond to pressure drops by restricting flow, alerting operators to potential leaks without requiring electronic monitoring.
Capabilities
| 3rd Party Certifications | UL, cUL, National Workgroup |
| Fuel Compatibility | Varying models for different fuel/biofuel combinations |
| Installation Method | Requires 2" NPT Leak Detector Port or Tee Housing |
| Startup Requirements | Manual 3 gph Test after install to verify |
| Testing Methodology | Pump ON testing after Pump OFF line pressure < 3 psi |
| Leak Test Result Validation | None - restricts output until next dispense cycle |
| 3 gph Leak Detection | Yes - restricts pump output to 3 gpm system flow |
| Precision Leak Detection | None - smaller leaks will increase test time |
| Line Test Results Reporting | Operator restricted (slow flow) reporting only |
LEARN MORE
Electronic Line Leak Detection (ELLD)
ELLD systems offer advanced monitoring with real-time data and automated alerts. ELLD continuously monitors line pressure, detecting leaks with precision accuracy, enabling remote diagnostics for improved operational efficiency.
Capabilities
| 3rd Party Certifications | UL, cUL, National Workgroup |
| Fuel Compatibility | Designed for various motor fuels |
| Installation Method | Requires standard 2" Female NPT Opening |
| Startup Requirements | EVO™ Series process AUTO-LEARN® and verifies install |
| Testing Methodology | Pump OFF testing after every dispense cycle |
| Leak Test Result Validation | Yes - thermally stabilizes line before declaring results |
| 3 gph Leak Detection | Yes - positive pump shutdown |
| Precision Leak Detection | Yes - 0.2 gph monthly and 0.1 gph annual options |
| Line Test Results Reporting | EVO™ Series history reporting options |
LEARN MORE
4" Submersible Pump Components & Key Dimensions
1. Manhole
2. Leak Detector
3. Manifold
4. Containment Sump
5. 4" Riser
6. Tank Adapter
7. Tank Manway
8. Column Pipe
9. Variable Length Coupler
10. Pump Motor Assembly (PMA)
11. End bell
12. Line Test Port, ¼" NPT
13. Leak Detector Port, 2" NPT
14. Syphon Port, ¼" NPT
15. Tank Port, ¼" NPT
16. Riser Pipe, 4" NPT
17. Discharge Outlet, 2" NPT
Notes:
1. Effective tank diameter (ETD) = Inside tank diameter (to top of 4" bung), including tank manway and/or sump adapter.
2. Model length (A) = ETD plus riser length minus bottom clearance minus 1" thread engagement.
3. Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.
Optional Features
Biofuel Blend Compatibility
FE PETRO® pumps are UL listed with both UL79A (up to 85% Ethanol) and UL79B (up to 20% or 100% Biodiesel).
Advanced Protection
Stop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump in the tank and in the sump from accelerated corrosion.
Turbine Pump Interface
Remote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Intake Filter Screen
Avoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering the pumping system with this factory-installed option.
Standard Features
Variable Speed
With faster fill times during peak hours and power savings during non-peak hours, variable speed submersible pumping systems allow you to maximize profits with consistent flow rates while mitigating operating expenses.
MagShell®
The patented stainless steel MagShell® is designed to maximize flow rate capabilities, potential throughput, and profits. By expanding the pump motor shell, the MagShell® increases the area for product flow by 45%.
Variable Length
The patented telescoping pump shaft lets installers adjust the length of the pump onsite for the perfect fit.
Active Air Eliminator
FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping.
Safety and Ease of Maintenance
FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products.
Simple Servicing
If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.
Manual Pressure Relief
As a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero. This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment.
Outlast, Outperform with Franklin Electric Inside
FE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance. Franklin Electric-powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades. They feature best-in-class flow rates and a long history of dependability.
Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
General
- Variable speed models are available in variable lengths only.
- Check valve: 2¾" (70mm) diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer.
- Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi (2.8 bar) and resets above 35 psi (2.4 bar).
- Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.
- Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination.
- Electrical disconnect: electrical yoke for positive contractor disconnect during service.
Pump Motor
- 4 Hp, variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
- 60 Hz Max. pressure: selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead.
- 50 Hz Max. pressure: selectable operating pressure on EcoVFC™ between 1.65 bar and 2.90 bar deadhead.
- Available with MagShell® which results in 45% increased flow area around motor.
60 Hz Power Requirements
- Variable speed pumps can only be controlled by a MagVFC™ variable frequency controller.
- VS4 models require three-phase incoming power supply to the MagVFC™ for proper operation.
- Incoming power supply to the MagVFC™ can be 200-250 VAC, 50 or 60 Hz.
- MagVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.
- MagVFC™ max. line draw: 20 Amps.
- Max motor draw: 15 Amps.
Liquid Compatibility
- Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
- STP variable speed models are UL listed for fuel mixtures containing up to 10% ethanol, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- IST/ISTAP variable speed models are UL and cUL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- All variable speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.
- All wetted elastomers are made of a high grade, fluorocarbon compound.
Fuel Compatibility for All Submersible Turbine Pumps
STP Standard Submersible Turbine Pumps with Fixed or Variable Speed Pump Motor Assembly
- UL79 for petroleum dispensing products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 10 percent (gasohol, E10), diesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 5 percent (B5), kerosene, or fuel oil.
- 20% MTBE, 20% ETBE or 17% TAME with gasoline.
STPAG, STPAP, IST, ISTAP Alcohol-Grade Compatible and Advanced Protection Fixed or Variable Speed Submersible Turbine Pumps
- UL79A for gasoline and gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E0 - E85) for products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E85).
- 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- UL79B for diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene, and fuel oil for products intended for use with diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene or fuel oil.
- 100% biodiesel.
Approvals
- cULus listed.
- Consult factory for applicable approvals.
4 Hp Variable Speed Pump Performance Chart - 60 Hz
For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.
4 Hp Submersible Pump Ordering Guide
A typical turbine model designation has up to five components to define the pump being supplied as follows:
XXX YYYYY Z - A - B
XXX = Basic Model Designation
STP = These standard variable speed and variable length models are capable of up to 10% ethanol with gasoline
IST = These variable speed and variable length models include alcohol-gasoline compatibility (up to 85% ethanol, up to 20% Biodiesel, or 100% Biodiesel).
ISTAP = These variable speed and variable length models include alcohol-gasoline compatibility (up to 85% ethanol, up to 20% Biodiesel, or 100% Biodiesel) and Advanced Protection with powder-coated, e-coated, and stainless steel components.
YYYYY = Factory Installed Options
Model designations may include one or more of the following characters in alphabetical order:
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell® (flow enhancing, expanded PMA shell)
R* = Model R check valve (24 psi relief/22 psi reset for PLLD)
W* = Model W check valve (16 psi relief/13 psi reset for PPM4000)
Z = Pump Motor Horsepower Rating
VS4 = 4 Hp variable speed
A = Model Length
VL1 = STP variable length range #1 (64" - 92")
VL2 = STP variable length range #2 (95" - 156")
VL3 = STP variable length range #3 (127" - 218")
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches. Riser pipes are available from 7" to 60" in 1" increments (additional charge for risers 31" or longer).
4 Hp Variable Speed Submersible Turbine Pumps
Variable speed, variable length.
| Model | Description | Model Length Range Number | Model Length Range* |
| STPMVS4-VL1 | 4 Hp variable speed with MagShell® | VL1 | 64" – 92" |
| STPMVS4-VL2 | 4 Hp variable speed with MagShell® | VL2 | 95" – 156" |
| STPMVS4-VL3 | 4 Hp variable speed with MagShell® | VL3 | 127" – 218" |
4 Hp Variable Speed Intelligent Submersible Turbine Pumps
Variable speed, variable length.
| Model | Description | Model Length Range Number | Model Length Range* |
| ISTMVS4-VL1 | 4 Hp variable speed with MagShell® | VL1 | 64" – 92" |
| ISTMVS4-VL2 | 4 Hp variable speed with MagShell® | VL2 | 95" – 156" |
| ISTMVS4-VL3 | 4 Hp variable speed with MagShell® | VL3 | 127" – 218" |
| ISTAPMVS4-VL1 | 4 Hp AG variable speed with Advanced Protection, and MagShell® | VL1 | 64" – 92" |
| ISTAPMVS4-VL2 | 4 Hp AG variable speed with Advanced Protection, and MagShell® | VL2 | 95" – 156" |
| ISTAPMVS4-VL3 | 4 Hp AG variable speed with Advanced Protection, and MagShell® | VL3 | 127" – 218" |
Notes:
- Remove “M” from model number for non-MagShell® pump motor assembly.
- All STP models are UL and cUL listed for compatibility with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- All IST/ISTAP models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
- All above models can only be powered by a MagVFC™. 4 hp models require three-phase incoming power supply, 2 hp models can be supplied with single- or three-phase incoming power.
- 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
- For riser pipe length 31" to 60", additional charge applies (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet
Factory Installed Options
Specified in model number at time of STP order.
| Model | Description |
| F | Floating suction adapter, 1½" NPT female, must be factory installed |
| K | IFS (intake filter screen) factory assembled to pump motor assembly |
| R | Model R check valve, factory installed, for Veeder-Root® PLLD Line Leak |
| W | Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak |
Intelligent submersible turbine pump specific accessories - 60Hz
| Model Number | Description |
|---|---|
| 5874202800 | MagVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 220 V, one required per STP |
| 400137908 | Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST) |
| 5800300100 | STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each |
| 402459931 | Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP) |
Intelligent submersible turbine pump specific accessories - 50Hz
| Model Number | Description |
|---|---|
| 5874202900 | EcoVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 380 V, one required per STP |
| 400137937 | Syphon check valve, alcohol-gasoline compatible |
| 402459931 | Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP) |
| 5800300200 | STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each |
4" STP Accessories & Parts
Visit the Accessories & Spare Parts page for a full listing of available products.
Accessories & PartsFeatured
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-1017 Submersible Pumping Systems Brochure.pdf | 4.59 MB | |
 |
FFS-0616 (60Hz) Pump Selection Guide.pdf | 2.09 MB | |
 |
FFS-0963 High Flow Pump Selection Guide.pdf | 2.16 MB | |
 |
FFS-0796 Submersible Turbine Pumps Datasheet.pdf | 1.95 MB | |
 |
FFS-0801 (50Hz) Submersible Turbine Pumps Datasheet.pdf | 4.72 MB | |
 |
FFS-0648 (50Hz) Pump Selection Guide.pdf | 7.67 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0801 (50Hz) Submersible Turbine Pumps Datasheet - Russian.pdf | 4.19 MB | |
 |
400604005 STP-IST Installation Guide.pdf | 2.88 MB | |
 |
400289002 PMA Replacement Guide.pdf | 1.23 MB | |
 |
228001101 MagVFC Install & Owner's Guide.pdf | 1.17 MB | |
 |
228001102 Eco VFC Installation Guide.pdf | 1.28 MB | |
 |
SB005 Syphon System Testing.pdf | 0.23 MB |