VP1000 Series

Dispenser-Mounted Vacuum Source

One vacuum pump per dispenser supplies both sides, reducing long term maintenance costs. The VP1000 has been designed to satisfy the vapor recovery needs of a blender or non-blender dispenser. Simple installation with no excavation minimizes downtime and labor. The VP1000 connects to the dispenser with a simple interface module without costly software changes or electronic board replacement. This is the most cost-effective dispenser-mounted vacuum-assist system on the market today.

Highlights
Specs
Order Info
Downloads
  • Highlights

    • Compatible with new and existing dispensers.
    • Underground tank certification.
    • Efficient vapor collection and hose clearing with a 1/8 Hp motor.
    • Clean Air Separator mechanically and passively manages tank pressure to prevent fugitive emissions and eliminates evaporative product loss.
    • Sensorless making for an easy install and maintenance-free solution.
    • No motor binding.
    • Near zero rotor replacement.
  • Specs

    CARB Certified for Use WithExecutive Order NumberTank Type
    Healy 600 bootless nozzleG-70-183UST
    Healy 800 ORVR nozzleG-70-191UST
    Healy 900 EVR nozzleVR-201UST
    VR-203UST

    VP1000 Dimensions

    VP1000 Installation

  • Order Info

    VP1000 Dispenser-Mounted Vacuum Source Kits

    Each kit includes vapor and electrical conduits as listed below. One VP1000 per dispenser supplies both sides.

    ModelDescription
    VP1000MGasboy™ (*) 9800 Series - Non-Vapor Ready to Healy
    Includes:Z081H hardware kit
    Z081E electrical kit
    Z081V vapor kit
    VP1000-5 vacuum pump
    1374A MC100-1 interface module with harness
    VP1000NDresser Wayne™ (*) Harmony™ (*) Series - Balance to Healy
    Includes:Z078H hardware kit
    Z078E electrical kit
    Z078V vapor kit
    VP1000-5 vacuum pump
    1365A MC100-1 interface module with harness
    VP1000PDresser Wayne™ (*) Ovation™ (*) Series - Balance or WayneVAC to Healy
    Includes:Z079H hardware kit
    Z079E electrical kit
    Z079V vapor kit
    VP1000-5 vacuum pump
    1365A MC100-1 interface module with harness
    VP1000QDresser Wayne™ (*) Harmony™ (*) Series - WayneVAC to Healy
    Includes:Z080H hardware kit
    Z080E electrical kit
    Z080V vapor kit
    VP1000-5 vacuum pump
    1365A MC100-1 interface module with harness
    VP1000RGilbarco™ (*) Encore™ (*) 300 or 500 Series - Balance to Healy
    Includes:Z082H hardware kit
    Z082E electrical kit
    Z082V vapor kit
    VP1000-5 vacuum pump
    1373A MC100-1 interface module with harness,
    VP1000SGilbarco™ (*) Encore™ (*) 300 or 500 Series - VaporVac® (*) to Healy
    Includes:Z082H hardware kit
    Z082E electrical kit
    Z083V vapor kit
    VP1000-5 vacuum pump
    1373A MC100-1 interface module with harness,
    VP1000TDresser Wayne™ (*) 3 Vista™ (*) or 4 Vista™ (*) Series - Balance to Healy
    Includes:Z084H hardware kit
    Z084E electrical kit
    Z084V vapor kit
    VP1000-5 vacuum pump
    1365A MC100-1 interface module with harness
    VP1000VDresser Wayne™ (*) 1 Vista™ (*) or 2 Vista™ (*) blenders only - Balance to Healy (*)
    Includes:Z084H hardware kit
    Z084E electrical kit
    Z084V vapor kit
    VP1000-5 vacuum pump
    1363A MC100-1 interface module with harness,

    VP1000 Dispenser Mounted Vacuum Source Kits (Non-Inclusive)

    Kits do not include vapor and electrical conduits. Use Z070E and Z071V kits listed below. One VP1000 per dispenser supplies both sides.

    ModelDescription
    VP1000AFor use with all dispenser types, use if a model-specific VP1000D-V is not available. Includes VP1000-5 vacuum pump, 1360A interface module and 1404 universal hardware/mounting kit.
    VP1000DGilbarco™ (*) 300 blender dispensers only (early model AC solenoid valves, pre-April 2003). Includes VP1000-5 vacuum pump, 1368A interface module with harness an 1404 universal hardware/mounting kit.
    VP1000EInternational only, VP1000-220, 1380A and 1404
    VP1000GWayne™ (*) DL non-blender dispensers only. Includes VP1000-5 vacuum pump, 1354A interface module with harness and 1404 universal hardware/mounting kit.
    VP1000HTokheim™ (*) Premier™ (*) C blender dispensers with 24 VDC solenoids only. Includes VP1000-5 vacuum pump, 1362A interface module with harness and 1404 universal hardware/mounting kit.
    VP1000JTokheim™ (*) earlier-series blender dispenser with AC and DC solenoids. Includes VP1000-5 vacuum pump, 1372A interface module with harness and 1404 universal hardware/mounting kit.

    Universal Vapour and Electrical Kits

    For use with the VP1000 kits listed above.

    ModelDescription
    Z070EElectrical installation kit for VP1000 Series vacuum source, for use with VP1000A-J
    Z071VVapor piping installation kit for VP1000 Series vacuum source, for use with VP1000A-J
    Z069EInternational only, 220V electrical installation kit for VP1000E

    VP1000 Replacement Parts

    ModelDescription
    13166" potted conduit assembly
    13463" potted conduit assembly, used in Z078E, Z079E, Z080E, and Z084E
    1354Wire harness for use with Wayne™ DL non-blenders
    1354A1354 wire harness with interface module
    1360Wire harness, universal
    1360A1360 wire harness with interface module, universal
    1362Wire harness for use with Tokheim™ Premier™ C blender dispensers with 24 VDC solenoids
    1362A1362 wire harness with interface module
    1363Wire harness for use with Wayne™ 1 Vista™, and 2 Vista™ blender dispensers
    1363A1363 wire harness with interface module
    1365Wire harness for use with Wayne™ Ovation™, 3 Vista™, and 4 Vista™ dispensers
    1365A1365 wire harness with interface module
    1368Wire harness for use with Gilbarco® Encore™ 300 blender dispensers, early AC solenoids, pre-April 2003
    1368A1368 wire harness with interface module
    1372For use with earlier version Tokheim™ blender dispensers with AC and DC solenoids
    1372A1372 wire harness with interface module
    1373Wire harness for use with Gilbarco® Encore™ 300 and 500 Series dispensers, with 24VDC solenoids
    1373A1373 wire harness with interface module
    1374Wire harness for use with Gasboy® 9800
    1374A1374 wire harness with interface module
    1404Universal mounting kit
    144401VP1000 front cover assembly (98008 O-ring sold separately)
    13602Spare fuse 5 A, 250 V
    MC100-1Universal interface module only
    VP1000-5*Vacuum pump only, 110 V
    RVP1000-5Rebuilt VP1000-5 vacuum pump only
    VP1000-5 CoreVP1000-5 core in reusable condition for rebuild
    VP1000VRC-GVP1000 vacuum pump service kit containing glass fiber-filled vane, five vanes, and pump cover O-ring
    VP1000-220*International vacuum pump only, 220 V
    MC200-1International control module only, 220 V
    131602901International 6" potted conduit assembly, 220 V
    1380International wire harness, universal 220 V
    1380AInternational 1380 wire harness with interface module, universal 220 V
    MC100-1 PLUGReplacement jumper plug for interface module
    98008O-ring for VP1000 front cover
    144402VP1000 front cover assembly (international only)
    VP1000VRC-G Vane and rotor replacement, PPS
    VP1000-5-B*Vacuum pump only, 120 V, bronze rotor
    405247901Vane-Only Kit
    • *UL Recognized Component
  • Downloads